20K Sensor Ceramic Piezoelectric Components Ring Type Piezo Ceramic Material Pzt8

• Type: Piezoelectric Ceramic
• Production Process: Ceramics
• Sensitivity: High
• Model NO.: OKS-YHJP-501765
• Application: Ultrasound Welding Transducer
• Usage: Piezoelectric Ceramic Element
• Material: Lead Zirconate Titanate Piezoelectric
• MOQ: 50PCS
• Transport Package: Foam and Carton
• Specification: 50x17x6.5mm PZT8
• Origin: Tianjin, China
• HS Code: 8543909000
• Production Capacity: 100000PCS/Per Month

Product Description

The principle of the piezoelectric ceramic transducer is that when pressure or tension is applied to the ceramic chip, charges of opposite polarity will be generated at the two ends of the ceramic chip and a current is generated through the circuit. This effect is called the piezoelectric effect. Therefore, in the design of ultrasonic transducers, various factors should be considered, such as acoustic impedance, frequency response, impedance matching, acoustic structure, vibration mode and conversion materials, and how to design and coordinate these factors to achieve electro-acoustic conversion. best value. As a kind of energy transmission network, piezoelectric ceramic transducer has the problem of energy conversion efficiency.
 
The conversion efficiency is related to the selection of the transducer material, the form of vibration, the structure of the mechanical vibration system (including the support mechanism) and the operating frequency. Therefore, the problem of the ultrasonic transmitter is solved. There are two materials for piezoelectric ceramic transducers: magnetostrictive metal and piezoelectric ceramics. Piezoelectric ceramic transducer is an electronic ceramic material with piezoelectric characteristics. The main difference from a typical piezoelectric quartz crystal that does not contain ferroelectric components is that the main components of the crystal phase are all ferroelectric crystal grains. Ceramics are polycrystalline aggregates with randomly oriented grains, so the spontaneous polarization vector of each ferroelectric grain is also disoriented.

If a transducer made of this piezoelectric ceramic is put into water, then under the action of sound waves, charges will be induced at both ends of the transducer, which is a sound wave receiver. In addition, the piezoelectric effect is reversible. If an alternating electric field is applied to a piezoelectric ceramic sheet, the ceramic sheet will become thinner and thicker from time to time, and it will vibrate and emit sound waves. In order to make the ceramic exhibit macroscopic piezoelectric properties, the piezoelectric ceramic must be polarized in a strong DC electric field after firing, and the end face is subjected to multiple electrodes, so that the polarization vector of the original disordered orientation is preferentially oriented in the direction of the electric field. , The piezoelectric ceramic after polarization treatment will maintain a certain macroscopic residual polarization strength, so that the ceramic has a certain pressure.

Ultrasonic pressure ceramic wafer product features:
1. The impedance is lower than 2 ohms
2. Stable waveform
3. High electromechanical conversion efficiency
4. Low dielectric loss
5. Low heat

Piezoelectric ceramic materials have high electromechanical coupling coefficient, suitable dielectric constant and high sensitivity. It is mainly used for high-sensitivity transducers, flowmeter transducers, level gauge transducers, accelerometer transducers, ultrasonic detection transducers, etc.
The piezoelectric ceramic sheet material has good piezoelectricity, high mechanical strength, high coercive field, and low dielectric loss in strong fields. It is mainly used for ultrasonic cleaning, powerful ultrasonic drilling, ultrasonic welding, scaler probe, beauty instrument probe, ultrasonic scalpel probe, cardiovascular therapy instrument probe, etc.

Ring Piezoelectric Ceramic (PZT-4 and pzt-8):

specification	Dimension	Radial frequency	Capacitance	Dielectric dissipation factor	Electromechanical coupling coefficient	Impedance	Thickness frequency	Mechanical
	(mm)	(KHz)	(pf)	tanδ(%)	(Kr)	Zr(Ω)	(KHz))	quality factor
								(Qm)
OKS-YHJP-25103	Φ25×Φ10×3	66.4	1240±12.5%	≤0.3	≥0.46	≤15	683±5%	800
OKS-YHJP-25104	Φ25×Φ10×4	66.4	930±12.5%	≤0.3	≥0.46	≤15	512±5%	800
OKS-YHJP-40125	Φ40×Φ12×5	45.9	2070±12.5%	≤0.3	≥0.46	≤15	410±5%	800
OKS-YHJP-40155	Φ40×Φ15×5	42.2	1960±12.5%	≤0.3	≥0.46	≤15	323±5%	500
OKS-YHJP-40176	Φ40×Φ17×6	40.5	1555±12.5%	≤0.3	≥0.46	≤15	341±5%	800
OKS-YHJP-40205	Φ40×Φ20×5	37.9	1700±12.5%	≤0.3	≥0.47	≤15	410±5%	800
OKS-YHJP-50206	Φ50×Φ20×6	33.2	2490±12.5%	≤0.3	≥0.46	≤15	341±5%	500
OKS-YHJP-501765	Φ50×Φ17×6.5	34.8	2430±12.5%	≤0.3	≥0.46	≤15	315±5%	800
OKS-YHJP-50236	Φ50×Φ23×6	31.2	2340±12.5%	≤0.3	≥0.47	≤15	341±5%	800
OKS-YHJP-50276	Φ50×Φ27×6	29.3	2100±12.5%	≤0.3	≥0.47	≤15	341±5%	800
OKS-YHJP-603010	Φ60×Φ30×10	25.3	1922±12.5%	≤0.3	≥0.47	≤18	205±5%	800
FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS

 

Piezoelectric Ceramic For cleaning machine:

Specification	Dimension	Radial frequency	Capacitance	Dielectric dissipation factor	Impedance	Kr	Mechanical
	(mm)	(KHz)	(±12.5%)pF	tanδ(%)	(Ω)		quality factor
							(Qm)
OKS-QXJP3030	Φ30×3.0	66.7	2730	≤0.3	≤15	≥0.55	500
OKS-QXJP3530	Φ35×3.0	63	3100	≤0.3	≤15	≥0.55	500
OKS-QXJP3865	Φ38×6.5	59.9	1580	≤0.3	≤15	≥0.55	500
OKS-QXJP4530	Φ45×3.0	50	5100	≤0.3	≤15	≥0.55	500
OKS-QXJP4535	Φ45×3.5	50	4700	≤0.3	≤15	≥0.55	500
OKS-QXJP5030	Φ50×3.0	46	5800	≤0.3	≤15	≥0.55	500
OKS-QXJP5035	Φ50×3.5	46	6300	≤0.3	≤15	≥0.55	500
OKS-QXJP5050	Φ50×5.0	46	4150	≤0.3	≤15	≥0.55	500
FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS