The ultrasonic industrial humidifier uses the atomizer module at the bottom of the sink to convert electrical energy into mechanical energy, and uses electronic over-frequency oscillation to emit 1.7MHz ultrasonic waves into the water. Through the high-frequency resonance of the atomizer, the water is thrown away from the water surface to produce a natural and elegant mist And blowing out of the machine, there is no need for heating or chemical agents to produce 1-5 micron water particles floating in the air, so as to achieve the purpose of isenthalpic humidification of the air. The ultrasonic industrial humidifier can automatically enter water, automatically humidify, automatically drain, and automatically clean without personnel on duty. It is easy to use and easy to install. The host can move flexibly on the universal wheel, and can also be wall-mounted or floor-mounted, applicable For various use environments.
Ultrasonic industrial humidifiers are used in industrial workshops to humidify the air, reduce temperature, remove dust, anti-static and other functions to filter air and dust. While humidifying, increase the oxygen content of the air, greatly creating and improving the environment for people to live.
Ultrasonic industrial humidifiers are widely used in the textile industry, paper industry, computer room, electronics industry, mobile phone battery industry, spraying industry, plastic industry, gunpowder industry, printing industry, laboratory, tobacco industry, HVAC industry, fresh-keeping storage, food industry , Planting industry, breeding industry, artificial landscape, artificial fogging, printing factory, printing and dyeing factory, air conditioning factory, supermarket, etc. Choose to use the ultrasonic industrial humidifier with high humidification intensity, uniform humidification, high humidification efficiency; energy saving, power saving, power consumption only 1/10 to 1/15 of electric humidifier; long service life, automatic humidity balance, automatic without water Protection; It has the functions of medical atomization, cold bathing surface, and jewelry cleaning.
Description of system performance characteristics:
1. The diameter of the mist particles produced by the ultrasonic humidifier is only 1~5μm, which can be received by the air express. The humidification efficiency is close to 100%. The particles are small and uniform, and can be transported over long distances. The air is humidified without dripping. Choose the φ110mm PVC pipe To transport water mist, a single PVC pipe can transport water mist to a distance of 40-50m. No nozzles are required, so there is no trouble of blocking the nozzles.
2. The energy consumption index per unit of humidification is low, the energy consumption is only 0.05kw/(kg.w), which is equivalent to 1/10~1/15 of other humidification methods, and the operating cost is low.
3. Adopting the world's advanced atomization technology and integrated atomization components, original design to prevent fan splashing, water leakage prevention design of the mist outlet, easy cleaning design and water shortage protection device, plus the 60,000-hour high-life roller imported from Taiwan The needle bearing fan ensures excellent humidification quality and reliable performance.
4. When the humidifier is atomized, there is no mechanical drive, no high-power motor, not pure mechanical energy to drive humidification, no compressed air, no noise interference, no pollution. The failure rate is low, it is an energy-saving and environmentally friendly humidification equipment, which is efficient, reliable and practical, and is your ideal choice.
5. The model is small in size, and can be independently built into a system according to site conditions. It is not only suitable for the installation of new plants, but also can transform and upgrade the old plants without destroying the original equipment to meet the humidity requirements of the production process.
Precautions for use:
1. When the atomizer is working normally, please do not put your hands on the spray cavity of the atomizer to prevent ultrasonic damage.
2. The atomizer must be in water to work normally. Please put it in the water before turning on the power and make sure that the surface of the atomizer is in a state of water to avoid damage to the atomizer.
3. When you stop using the atomizer, please disconnect the power first, and then take out the atomizer from the water.
4. When using this atomizer, please select a power supply with an output power greater than 350W and an output voltage of DC45±5V. The power supply should be isolated from the fog to avoid the fog from getting into the power circuit board, short-circuiting, and burning the power supply.
5. When multiple atomizers are used in the same container, they need to be equipped with separate power supplies. It is not possible to connect multiple atomizers with a single power supply for use, and pay attention to make the shells of each atomizer communicate with each other to prevent it from working. Electric corrosion.
6. The mist produced by the atomizer must be forced out by a fan, and each group of atomizers retain a 350cm2 plane space to avoid excessive water temperature and shorten the life of the atomizer.
7. The atomizer is not suitable for atomizing corrosive liquids, so as not to damage the metal shell and atomizing film of the atomizer.
8. Please don't damage the water level sensor switch during installation, so as to avoid the failure of the water level switch and cause the atomizer to lose control. If the water level switch is damaged, stop using it, otherwise the atomizer will burn dry and further damage the atomizer. At this time, it can be used after being repaired by professional maintenance personnel.
Audited Supplier 
){kind=link}