Industrial Heater Exchange Auto Parts Ultrasonic Cleaner with Generator for Aluminum Parts Cleaning 28kHz

• Application: Industrial Cleaning
• Cleaning Media: Wet Cleaning
• Automation: Automatic
• Control: Ultrasonic Cleaning Generator
• Principle: Physical Cleaning
• Condition: New
• Model NO.: OKS-DQXJ-1042
• Customized: Customized
• Feature: Clean Thoroughly
• Type: Ultrasonic Cleaner for Removing Oil/Dirt
• Power: 3000watt
• Heater: Have
• Frequency: 20K, 25K,28K,33K,40K Choose One
• Voltage: 110V-240V, 50Hz-60Hz AC
• Tank: Stainless Steel Single Bath
• Transport Package: Wooden Packing
• Origin: Tianjin, China
• HS Code: 8543709990
• Production Capacity: 1000set/Month

Product Description

Ultrasonic cleaning at higher frequencies creates an abundance of minute vacuum bubbles which allow for cleaning to occur. These bubbles implode on and inside surgical device surfaces in a process defined as cavitation. This micromechanical scrubbing action is able to reach small crevices, irregular surfaces, and internal passages to ensure proper and consistent cleaning.

Ultrasonic Cleaning for Automotive Engine Parts
Replacing the old hectic ways of cleaning…
These days' ultrasonic cleaners for car engine are widely used for cleaning any shape and size of car engine. With the advent of these industrial cleaners, the old fashioned solvent cleaners used in yesteryear's neighborhood garages are completely replaced.
Probably you can recall how mechanics used to hold the engine under the faucet and practically scrubbing away the grease, oil, lubricant and other contaminants on the automotive components.
But now, with the help of ultrasonic cleaners, all the repairmen needs to do is - dissemble the car engine parts and place them in an ultrasonic cleaner tank for cleaning them efficiently and fast.
The magic of ultrasound waves works faster, much more safely and efficiently for cleaning the engine parts. Moreover it consumes far lesser amount of time than it takes with traditional hand scrubbing of the engine parts.
Overall, these cleaners are the best alternative if you want to speedily get rid of heavy built up grease or badly choked up engine parts. Not only for cleaning car engine parts, but it can be even used for cleaning aircraft and marine engine parts.

OKSSONIC Ultrasonics manufactures large ultrasonic cleaners for the cleaning of heavy and big components with light or heavy contamination. Large tanks are usually required to clean parts such as:
Plastic Injection Molds
Aerospace components
Large batches of smaller parts
Bulk rebuilding of firearms
Heat Exchangers
Engine blocks

Configuration parameters:
Use high-quality vibrator, strong output.
The tank body is made of stainless steel SUS304, which is durable.
Cartridge-type stainless steel heating tube, EGO temperature control, high heating efficiency.
It is an excited generator with stable performance and strong output.
The ultrasonic power is adjustable from 0 to 100%, and a stainless steel drain ball valve is installed.

Q. "Will ultrasonic cleaning remove the contaminants on my parts?"
A. The answer to this question relies almost entirely on the bond strength between the part, and the contaminant. If the contaminant has no physical or chemical bond to the surface, then ultrasonic cleaners will capable of removing it. However, if the contaminant has a strong bond to the part, such as that found with burned carbons, then a detergent must be selected which will have the ability to loosen the bond to a degree where the ultrasonic cleaner can easily remove it. This is why the use of proper cleaning fluids is so important in the ultrasonic cleaner.
 
Q. "Which ultrasonic frequency would be most appropriate for my application?"
A. This depends upon many factors, including part size, contaminant, material of construction of the part, and others. Traditionally, the heavier the part, the lower the ultrasonic frequency in use. The more detailed the part, the higher the frequency which should be used. This is one of the advantages of our ultrasonic cleaner, which includes more than 1 frequency in the same tank. allows us to provide scrubbing power, without sacrificing penetration and detailed scrubbing action.
 

Type	Internal size L*W*H (mm)	Outsize mm L*W*H (mm)	Frequency (Khz)	Power(W)	Heating(W)	Total power(W)	voltage
OKS-DQXJ-1006	280×210×210	320×250×350	20,28,33,40,80,130	300	1000	1300	220V
OKS-DQXJ-1012	400×310×280	520×430×600	20,28,33,40,80,130	600	3000	3600	220V
OKS-DQXJ-1018	490×360×320	610×480×675	20,28,33,40,80,130	900	3000	3900	220V
OKS-DQXJ-1024	630×430×320	740×550×675	20,28,33,40,80,130	1200	4000	5200	220V
OKS-DQXJ-1030	630×530×320	750×650×675	20,28,33,40,80,130	1500	4000	5500	220V
OKS-DQXJ-1036	680×530×360	800×650×700	20,28,33,40,80,130	1800	5000	6800	220V
OKS-DQXJ-1040	680×570×400	830×710×735	20,28,33,40,80,130	2000	5000	7000	220V
OKS-DQXJ-1041	730×570×450	880×710×735	20,28,33,40,80,130	2400	6000	8400	220V
OKS-DQXJ-1042	790×670×510	940×765×785	20,28,33,40,80,130	3000	6000	9000	380V
OKS-DQXJ-1043	850×770×570	990×820×785	20,28,33,40,80,130	4000	7000	11000	380V
OKS-DQXJ-1044	910×820×620	1050×880×840	20,28,33,40,80,130	5000	7000	12000	380V
OKS-DQXJ-1045	960×870×680	1100×940×920	20,28,33,40,80,130	8000	8000	16000	380V
OKS-DQXJ-1046	1100×930×730	1160×1000×980	20,28,33,40,80,130	10000	8000	18000	380V
Welcome OEM size enquire