Piezoelectric Pressure Sensor Pzt Material Ultrasonic Ceramic Tube/Rings/Disk

Product Description

Ceramics that can use electrical and magnetic properties in the electronics industry are called electronic ceramics. Electronic ceramics finally obtain ceramics with new functions through precise control of the surface, grain boundaries and size structure. It can be widely used in energy, household appliances, automobiles, etc.
Electronic ceramic substrate materials In electronic ceramics, insulators occupy the most important position. In particular, the insulating substrate or packaging material for advanced integrated circuits can be a high-purity dense alumina sintered body with a dimensional accuracy of micrometers or less. High-purity dense alumina has insulating properties that metal materials do not have, and thermal conductivity that polymer materials do not.

Ceramic Piezoelectric Materials Piezoelectric elements can convert electrical and mechanical signals. Piezoelectric ceramic elements of a certain shape are mainly made by sintering PbTiO3-PbZrO3 system (PZT). Even if it is a sintered body, the piezoelectricity of a single crystal can be obtained by polarization. The main uses of piezoelectric components are spark plugs and resonators. The resonator acts as a radio wave filter that selectively passes a specific frequency, and is an indispensable component of a tuning circuit such as television (TV) and radio.

Ceramic semiconductor materials There are many semiconductors in ceramics. The property of resistance changing with temperature can be used for nonlinear resistance. Negative temperature coefficient non-linear resistors (NTC non-linear resistors) decrease in resistance with increasing temperature, and have general semiconductor characteristics. Iron-based metal oxide ceramics are chemically and thermally stable, so they can be used in non-linear resistors to control temperature in a wide range. In contrast to this, the component called a positive temperature coefficient thermistor (PTC thermistor) uses semiconductorized BaTiO3 ceramics. This kind of ceramic has a sharp increase in resistance at the phase transition temperature. If it is used as a resistance heating element, it can automatically control the temperature around the phase transition temperature, which is very convenient.


When voltage is applied to piezoelectric ceramics, mechanical deformation will occur with changes in voltage and frequency. On the other hand, when the piezoelectric ceramic is vibrated, an electric charge is generated. Using this principle, when an electrical signal is applied to a vibrator composed of two piezoelectric ceramics or a piezoelectric ceramic and a metal sheet, so-called bimorph element, ultrasonic waves will be emitted due to bending vibration. On the contrary, when ultrasonic vibration is applied to the piezoelectric bimorph element, an electrical signal is generated. Based on the above effects, piezoelectric ceramics can be used as ultrasonic sensors.

Piezoelectric ceramic wafer is a simple and lightweight electrical device. It is widely used because of its high sensitivity, no magnetic field spreading, no copper wire and magnet, low cost, low power consumption, and easy mass production. Suitable for the transmission and reception of ultrasonic and infrasonic waves, a relatively large area of piezoelectric ceramics can also be used to detect pressure and vibration. The working principle is to use the reversibility of the piezoelectric effect to apply audio voltage on it to emit sound.


Piezoelectric ceramics are functional ceramic materials that can mutually convert mechanical energy and electrical energy, and belong to inorganic non-metallic materials. At the same time, it has positive and negative piezoelectric effects.
 Piezo Ceramic For Tooth-Cleaning

Specification	Dimension (mm)	Radial Frequency (fs)	Capacitance (pF)	Electromechanical coupling coefficient (Kr)	Piezoelectric voltage coefficient ( d33)	Dielectric dissipation factor (tanδ)
OKS-PCTC1052	Φ10×Φ5×2	145KHz±5%	330 ±12.5%	0.54	260	≤0.6
OKS-PCTC1051	Φ10×Φ5×2	150KHz±5%	310±12.5%	0.31	200	≤0.3
FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS

 

Specification	Dimension (mm)	Radial frequency (KHz)	Capacitance (±12.5%)pF	Dielectric dissipation factor tanδ(%)	Impedance (Ω)	Kr	Mechanical quality factor  (Qm)
OKS-PD3030	Φ30×3.0	66.7	2730	≤0.3	≤15	≥0.55	500
OKS-PD3530	Φ35×3.0	63.0	3100	≤0.3	≤15	≥0.55	500
OKS-PD3865	Φ38×6.5	59.9	1580	≤0.3	≤15	≥0.55	500
OKS-PD4530	Φ45×3.0	50.0	5100	≤0.3	≤15	≥0.55	500
OKS-PD4535	Φ45×3.5	50.0	4700	≤0.3	≤15	≥0.55	500
OKS-PD5030	Φ50×3.0	46.0	5800	≤0.3	≤15	≥0.55	500
OKS-PD5035	Φ50×3.5	46.0	6300	≤0.3	≤15	≥0.55	500
OKS-PD5050	Φ50×5.0	46.0	4150	≤0.3	≤15	≥0.55	500
FOR MORE OEM SIZE WELCOME TO ENQUIRE SALERS

Ring Piezoelectric Ceramic (PZT-4 and pzt-8)

Specification	Dimension (mm)	Radial frequency (KHz)	Capacitance (pf)	Dielectric dissipation factor tanδ(%)	Electromechanical coupling coefficient (Kr)	Impedance Zr(Ω)	Thickness frequency (KHz))	Mechanical quality factor  (Qm)
OKS-PR-25103	Φ25×Φ10×3	66.4	1240±12.5%	≤0.3	≥0.46	≤15	683±5%	800
OKS-PR-225104	Φ25×Φ10×4	66.4	930±12.5%	≤0.3	≥0.46	≤15	512±5%	800
OKS-PR-40155	Φ40×Φ12×5	45.9	2070±12.5%	≤0.3	≥0.46	≤15	410±5%	800
OKS-PR-40155	Φ40×Φ15×5	42.2	1960±12.5%	≤0.3	≥0.46	≤15	323±5%	500
OKS-PR-40176	Φ40×Φ17×6	40.5	1555±12.5%	≤0.3	≥0.46	≤15	341±5%	800
OKS-PR-40205	Φ40×Φ20×5	37.9	1700±12.5%	≤0.3	≥0.47	≤15	410±5%	800
OKS-PR-50205	Φ50×Φ20×5	33.2	2490±12.5%	≤0.3	≥0.46	≤15	341±5%	500
OKS-PR-50206	Φ50×Φ20×6	33.2	2490±12.5%	≤0.3	≥0.46	≤15	341±5%	500
OKS-PR-502065	Φ50×Φ20×6.5	33.2	2490±12.5%	≤0.3	≥0.46	≤15	341±5%	500
OKS-PR-50175	Φ50×Φ17×5	34.3	2430±12.5%	≤0.3	≥0.46	≤15	315±5%	800
OKS-PR-50176	Φ50×Φ17×6	34.3	2430±12.5%	≤0.3	≥0.46	≤15	315±5%	800
OKS-PR-501765	Φ50×Φ17×6.5	34.8	2430±12.5%	≤0.3	≥0.46	≤15	315±5%	800
OKS-PR-50236	Φ50×Φ23×6	31.2	2340±12.5%	≤0.3	≥0.47	≤15	341±5%	800
OKS-PR-50276	Φ50×Φ27×6	29.3	2100±12.5%	≤0.3	≥0.47	≤15	341±5%	800
OKS-PR-603010	Φ60×Φ30×10	25.3	1922±12.5%	≤0.3	≥0.47	≤15	341±5%	800