Working principle of ultrasonic humidifier:
Ultrasonic series humidifier products use high-frequency electronic oscillation circuit, the ultrasonic energy generated by the transducer directly acts on the water, and the water is atomized under the action of strong ultrasonic cavitation. Atomized into fine water particles with a diameter of only 1 ~ 5μm, and blown to the humidification space through a unique air duct, the water mist particles exchange heat and moisture with the flowing air to achieve the purpose of isenthalpic humidification of the air.
The ultrasonic atomizing humidifier is designed into two ways of use. It can be hung on the external wall, and can also be replaced by rubber wheels to adapt to use under different conditions. The humidifier is designed with non-water protection and automatic water inlet when energized, and the water level is automatically controlled.
Description of system performance characteristics:
1. The diameter of the mist particles produced by the ultrasonic humidifier is only 1~5μm, which can be received by the air express. The humidification efficiency is close to 100%. The particles are small and uniform, and can be transported over long distances. The air is humidified without dripping. Choose the φ110mm PVC pipe To transport water mist, a single PVC pipe can transport water mist to a distance of 40-50m. No nozzles are required, so there is no trouble of blocking the nozzles.
2. The energy consumption index per unit of humidification is low, the energy consumption is only 0.05kw/(kg.w), which is equivalent to 1/10~1/15 of other humidification methods, and the operating cost is low.
3. Adopting the world's advanced atomization technology and integrated atomization components, original design to prevent fan splashing, water leakage prevention design of the mist outlet, easy cleaning design and water shortage protection device, plus the 60,000-hour high-life roller imported from Taiwan The needle bearing fan ensures excellent humidification quality and reliable performance.
4. When the humidifier is atomized, there is no mechanical drive, no high-power motor, not pure mechanical energy to drive humidification, no compressed air, no noise interference, no pollution. The failure rate is low, it is an energy-saving and environmentally friendly humidification equipment, which is efficient, reliable and practical, and is your ideal choice.
5. The model is small in size, and can be independently built into a system according to site conditions. It is not only suitable for the installation of new plants, but also can transform and upgrade the old plants without destroying the original equipment to meet the humidity requirements of the production process.
The service life of the atomization sheet is about 3000 hours, and it is easy to replace. The service life is also related to the quality of the water. If scale deposits on the atomization sheet, please clean it with a soft cloth. According to different water quality and purpose of use, different atomizers can be used. For example, stainless steel-clad atomizers should be used in areas with hard water quality, and glass-glazed atomizers should be selected for use in acid-resistant environments. The atomizer has an automatic protection function for water cut. When the water level is lower than the water level switch, the atomizer will automatically stop working. When the atomizer is working, please do not put your hand on the top of the atomizer. Due to the high frequency vibration, the hand will feel tingling, but this is not an electrical shock or leakage.
The correct use steps of the atomizer are: put the atomizer into a container filled with water → connect the power cord of the atomizer to the transformer → then connect the plug of the transformer to the power source.
Ultrasonic atomizer adopts high-efficiency integrated circuit, ultra-small and integrated unique structure design, and important parts adopt high-quality atomizer. Humidifier, incense device, beauty machine, disinfection machine, bathtub fog machine, bonsai, handicrafts are widely used.
Ultrasonic atomizer series products, from single nozzle to multiple nozzles, from unstable flange mounting structure to high-performance input type, from water atomizer to atomizer resistant to strong oxidants such as chlorine dioxide, from zinc From alloy shell to brass and stainless steel shell, select the atomizer product model, and adjust the parameters and process of the atomizer reasonably
Audited Supplier 
){kind=link}